Mi Remote controller MOD APK [Premium] for Android

Guys, everything works, double clicking fixed it by disconnecting the internet. 1.First reset the cache and data 2.then go to the application and with the internet turned on start searching for TV. 3. Disconnect internet and select your TV. 4. Then with disconnected internet pass the binding "remote control to TV" 5. Done. The remote works adequately without 2 presses.

There is no normal support for android 11, previously all the buttons worked normally, now the channels are switched in 2, and the sound is increased or decreased by 2 divisions, as well as some icons in the menu have become inactive, and those that are active, do not work normally.TV Lg

The application is normal but includes only the base can not go into the application and so on. You can control it, but for some reason one touch is read in 2 or even 3 taps, so it is hard to access the channel.

I give it 4*, because it is the only application that found the tuner Volakabel "Kaon". But only 4 buttons work: channel switching and sound below (there is no sound above).

All in principle normal works phone Xiaomi redmi note 8 pro control can be almost anything and models dohrenalyon do not understand those who have nothing works.... P. S. If you at the first start does not give anything to configure and just pops out an error, google whether your phone has an IR port

Useless nonsense! TV xiaomi mi tv uhd 4s 55" works in the network 5g, in the phone 3g and therefore it does not see it. Unlike other programs that connect to the TV directly and not via wifi.

Smart TV xiaomi mi tv4a and poco f3 (before that was xiaomi mi 8) do not want to work together and the application has been updated more than once, and the firmware on the tv... Wi-Fi via xiaomi router. Something kind of sad.... The coolest thing is that when I had xiaomi mi5 everything worked fine.....

Because of the new cut-down remotes, you can not use the TV normally, there are not enough buttons, when you press a button on your phone, the TV responds as a few presses, for example, you select channel 10 and it made 1100. Useful only if you need to turn on/off or make volume....

I have Hisense, the remote used to work almost all functions. Now on, off, sound, channels, return...

After updating either the software or the application itself, on my Redmi note 8t the remote has become very slow... pressing on channel 4 for example, can by itself press another 44, and as a result, channel 444... The volume goes up two levels by pressing once... I do not understand what is happening and how to fix it... help me. Thank you.

The televisions seem to work. But the old Panasonic connected, but the channels only buttons single digits takes and the decimal one can not only increase. From 1 to 9 buttons, the rest only in ascending order is very uncomfortable. Exactly the decimal button is not active.

CAPITAL lacks the ability to create programs from different commands from different consoles. For example, by pressing one button to turn on the TV, media player, receiver, select the input on the TV. On Panasonic TVs, switching on is done by holding down the "power on" button. This is not taken into account in the app. Therefore, you have to turn the TV on and off with two or three short presses of the button. This is not very convenient. It is a promising application, but it needs to be improved.

Dear Developers! I found my TV, but I would like to be able to connect to TV set-top boxes, because my usual remote control ran out of power and I decided to use this application, it turned out that the remote itself, works, but not with the console, but with the TV, if you can, then try to fix this malaise

App ist sehr gut, aber bitte fügen Sie realme smart tv remote

Maybe someone can help, on yasen (yasin) fit the remote from the pioneer, channels, sound, power, settings!!!! Yes another thing I liked the sound can be adjusted key sound android!!!! The only thing killed 2 hours to pick up. The rarabs please add the company is clear! Any suggestions Dear developers is it possible to make a widget?

When selecting mi tv/mi box,offers to use wi-fi remote control.Where to get it? All describe how to connect to third-party equipment,but how to connect to Mi TV all silent.

Of course the app is cool, but I have a Mi TV 4S, which does not have a built-in IR port, and to connect to it you need Wi-Fi, but the trick is that there is no choice of remote mode, only the IR port, and nothing. By the way an interesting fact, when you create a remote Mi TV/Mi Box, there is an inscription at the bottom, that Mi TV 3 and above do not have an IR port, and it is necessary to connect to them via Wi-Fi. But how am I supposed to connect if no app can connect to my TV?