OpenDiag Mobile MOD APK [Premium] for Android

The first time I connected to the elm via bluetooth calmly, deleted errors. The second time the connection is established, the unit is detected, but after a second the tabs turn gray and become unclickable. I do not know what to do, and reinstalled, and connect again, does not save. Android 11, Priora 1.6 16-valve.

Everything is great, the application is good, but disappears link through bluetooth, a minute 2 shows, then just falls off, all wires checked, dialed. When trying to reconnect, just does not connect, you have to turn off the bluetooth and reconnect. Phone Xiaomi reden Note 7

The program does not connect with 2012 Lada Grant. The program writes (on the auto-detection of the block) that allegedly you are trying to connect to a foreign car, and the program is designed for domestic cars. I choose manually itelma m74can and the program connects) but all fields are just empty there are no parameters. The answer of the developer after I threw log connection to his e-mail - Change the adapter. It does not know how to work on the protocols of ECU cars, only on the standard OBD Apparently a fake adapter caught:(

Vaz 2114, ebu itelma m73, earlier through elm327 connected without problems, after some updates stopped categorically connect with the ebu, with elm connects quickly. Other programs connect without problems, but the point paid then for the full version of your g@shit if just a shortcut to see. Sometimes it comes out that the ignition is not switched on if other blocks are selected.

The program is good, it would also be nice to add a function of fuel correction as a percentage (for example +20% / -20%), this feature would be very useful for configuring HBO. I apologize, dmrv frequency, ebu 17.9.7. so no ADC in volts

Good afternoon, before upgrading excellent read many blocks of Vaz, Uaz gas except for the new blocks Bosch on the patriot, mikas 7.1 and 10.3 but after updating on the gazelle stopped connecting to the mykas from 7.1 to mykas 11 does the download and hangs on it then says no connection ECU, but the adapter and phone all remain the same, but I put on vaz connected without problems, what can be impossible to connect to the block ECU models gas ???? When selecting the unit manually e.g. Mikas 7.1 says the ECU is not working.

Application hooked up immediately, everything works.It shows readings from sensors and supply voltage.What is good, even gives the voltage at the DPMV, no need for any multimeters.No advertising.The best application for domestic cars.Immediately found the fault himself.Pindel coolant sensor.Here is the air flow of 60kg/h at the appointed 10 is not yet clear the reason,dmrv 1.035 gives.If you suggest a possible cause will be grateful))))) I myself begin to sin the ECU firmware unknown author (ZAL))).

The most travel app!!! Everything is simple and understandable. You get the most accurate and adequate information on all parameters during self-diagnostics. ECU parameters, ADC channels, detonation parameters, ignition skips. Current and saved errors, with the ability to reset them. With such impressive capabilities, there is not even a hint of extortion or advertising in this program. Thank you!!!

The only normal application I found for the m86 block. It shows a lot of parameters including cylinder skips. A small hitch to activate the paid version for 100 rubles, but it is worth it. All in Russian, there is a detailed description of how the application works, I really liked it.

Great application I use for more than a year works perfectly, and if someone does not connect or does not see the adapter, then first you need to turn on your head because not every smartphone is prescribed system files that connect your smartphone with adapters

After the last update, the program does not work correctly. All indications of the car does not show correctly. For example; the temperature shows -40, the charge 11.2v. indicators do not change. And all other indicators or overstated or understated. Also with the diagnostics, I get unnecessary errors or have no errors. Not on the same car. Tried it on 5 cars.

Hello, I bought a new phone, copied the program, but it does not work on the new phone, that is, there is no connection to the car, the old phone works. What to do? I have a paid version. The new phone -11 android, 5.1 bluetooth.

The only application that determines the ECU of my Pattaya, RECORD, so as not to go and stare at the phone until you have not drove into someone, and then quietly sat down and looked at the changes in parameters during the trip, and do the expense of the trip to calculate. 2021г. Now it does not detect anything at all, the adapter is in good working order. And so was a good program, all the indicators as in the table, convenient and understandable, but not as in the bastard then

It has always worked fine. But recently began to lose connection, as many here. In the tabs information and errors, communication is not lost, just go to the parameters, after 10 seconds the blue machine. I got a Bosch 17 and nothing has changed. I will add a review, since the problem has been solved. The problem appeared after changing the phone with a 10 android. I have found on one forum that buetooth 5.0 is not good with old devices. I bought a wi-fi scanner and the connection is no longer lost.

Does not connect to the old nines. Sometimes it connects, but you have to manually go through all the blocks and only then it connects. From time to time I have to do VAZ diagnostics. Author, thank you very much for the program. But why does it often not see old brains? How can I fix it? All the parameters are default